displaying posts 1 to 13 of 13

Author Subject: Headlamp Washer cover
mrantarctica

Newbie

Location: Auckland

Registered: 12 Nov 2011

Posts: 4

Status: Offline

Post #1
Hi there,

Am after a headlamp washer jet cover (or the entire assembly if you have it) for a Ph2 306 GTI6 (Continental/JDM) for delivery to New Zealand!

- the passengers side cover on mine has disappeared and I'm having difficulty sourcing a new one. Apparently buying the whole assembly from peugeot is in the hundreds of dollars category which seems a bit much for a piece of ABS plastic housing the nozzle/jet!

Cheers
Posted 26th Jan 2013 at 04:40
welshpug!

Capt Pedantic

Location: Bigend, Wales.

Registered: 27 Mar 2007

Posts: 25,871

Status: Offline

Post #2
Wont find them over here! Never fitted to uk cars.

________________________________________

need a part number? get on here - http://public.servicebox.peugeot.com

Bring on the Trumpets.

Posted 26th Jan 2013 at 06:13
mrantarctica

Newbie

Location: Auckland

Registered: 12 Nov 2011

Posts: 4

Status: Offline

Post #3
was worth a shot. other option might be to just take the washers out and replace the bumper... don't use the washers much anyway and they kinda look unsightly. worst case, I'll just have to buy the washer assembly for the cover
Posted 26th Jan 2013 at 10:39
miles

Seasoned Pro

Location: Ringwood

Registered: 28 Dec 2002

Posts: 3,433

Status: Offline

Post #4
They where, I had them on mine

________________________________________

306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a few

Road, Track and Race/Rally car preparation to your personal requirements,
Full Workshop & Diagnostic Facilities
New and Second parts, from Plugs to Turbo's
We now also carry out Routine Servicing
www.pugracing.com

& FB Page, https://www.facebook.com/PugRacing

Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop

2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way,
Posted 26th Jan 2013 at 12:23
bigbadbowen

Seasoned Pro

Location: Winchester

Registered: 21 Nov 2003

Posts: 13,753

Status: Offline

Post #5
miles wrote:
They where, I had them on mine


Never seen them on a uk car infact I'm sure it wasn't an option either No
Posted 26th Jan 2013 at 16:51
thugpuggin

Seasoned Pro

Location: Bristol

Registered: 10 Apr 2004

Posts: 26,784

Status: Offline

Post #6
Now where's that popcorn smiley???

________________________________________

Black X Reg PIII.VGTi 6 A4212 pt 1 A4212 pt 2 Searching the streets of Bristol for 1.36p/day.

Joint Kent Leader

Posted 26th Jan 2013 at 17:17
beez_neez_gt

Seasoned Pro

Location: @ de limit of adhesion !

Registered: 14 Oct 2008

Posts: 2,916

Status: Offline

Post #7
I remember seeing a 306 with them fitted down south before now, i think it was an estate version.

Whether availible at the dealers or not i dont know but it is possible someone may have fitted a bumper that was bought from France with them fitted, that is if Peugeot in France had them as an option ?

I guess its one of a few possibilities.

________________________________________

Pug fee`ver,

Pick a Bogey, buy a Pug.

Black 306 GTI 6 Standard, was 60k mileage, bargain!!

Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 26th Jan 2013 at 18:53
miles

Seasoned Pro

Location: Ringwood

Registered: 28 Dec 2002

Posts: 3,433

Status: Offline

Post #8
For those non beliver's



Was a phase 1

________________________________________

306 Rallye Sptint/Race Car, 205 CTI 1.9 8v to name a few

Road, Track and Race/Rally car preparation to your personal requirements,
Full Workshop & Diagnostic Facilities
New and Second parts, from Plugs to Turbo's
We now also carry out Routine Servicing
www.pugracing.com

& FB Page, https://www.facebook.com/PugRacing

Ebay; http://stores.ebay.co.uk/Pug-Racing-Shop

2012/2013/2014/2019 Class Winners at Gurston Down Speed Hillclimb & Joint overall, Class record too along the way,
Posted 26th Jan 2013 at 21:07
Rich E Forum Admin

Location: Hertfordshire

Registered: 27 Apr 2005

Posts: 7,757

Status: Offline

Post #9
Was it originally owned by a Peugeot employee, by any chance?

________________________________________

Rich
Posted 26th Jan 2013 at 21:10
thugpuggin

Seasoned Pro

Location: Bristol

Registered: 10 Apr 2004

Posts: 26,784

Status: Offline

Post #10
Thought they would be those type. OP is on about flush pop up version.

________________________________________

Black X Reg PIII.VGTi 6 A4212 pt 1 A4212 pt 2 Searching the streets of Bristol for 1.36p/day.

Joint Kent Leader

Posted 26th Jan 2013 at 21:10
mrantarctica

Newbie

Location: Auckland

Registered: 12 Nov 2011

Posts: 4

Status: Offline

Post #11
Haha I knew I wasn't crazy!

Pretty darn similar but not identical. My covers look the same shape and are made of that black ABS stuff features on the rest of the trim pieces. These covers shown have a recessed line running around the middle. Basically mine are just a pyramid shaped plastic housing that sits on the bumper edge. Annoying bloody things - especially if they go missing !
Posted 26th Jan 2013 at 21:53
rikky Pikey

Location: cheshire

Registered: 28 Feb 2004

Posts: 26,801

Status: Offline

Post #12
Retrofit 406 coupe ones FTW

________________________________________

306 rallye reproduction decals (full sets/individual decals) | 306 b-pillar textured vinyl weatherstrips
306 slam panel esso stickers | 306 yellow / orange / pension fund red side door badges
gti6 inlet manifold badges | 306 rear boot badges (p2/p3)
winner of Extraction of toys from prams with outstanding vigour award 2009 [source: gti6 owners club]
Posted 26th Jan 2013 at 22:04
thugpuggin

Seasoned Pro

Location: Bristol

Registered: 10 Apr 2004

Posts: 26,784

Status: Offline

Post #13
rikky wrote:
Retrofit 406 coupe ones FTW


#wolfcreek

________________________________________

Black X Reg PIII.VGTi 6 A4212 pt 1 A4212 pt 2 Searching the streets of Bristol for 1.36p/day.

Joint Kent Leader

Posted 26th Jan 2013 at 23:38

All times are GMT. The time is now 14:22

The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)