Author	Subject: Clear Timing Belt Covers
Puggitt Regular Location: New Zealand Registered: 07 May 2012 Posts: 293 Status: Offline	Post #1 Was wondering if there is any around or somewhere that would make them? probably better luck getting them made somewhere in the uk rather than here in nz Would be good to have the ability to check for leaky seals at a glance + style bonus (provided no leaky seals )
Posted 9th May 2014 at 00:10 Profile

eddy_gti6 Seasoned Pro Location: Durham Registered: 20 Oct 2008 Posts: 8,716 Status: Offline	Post #2 Think thats going to be a 1 off custom thing. I have never seen one for a 306. ________________________________________ Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 9th May 2014 at 01:28 Profile

Puggitt Regular Location: New Zealand Registered: 07 May 2012 Posts: 293 Status: Offline	Post #3 Times like this I worked in plastic sheet manufacturing... What good is a 100 micron thick timing cover I probably can get one made though a few connections but was wondering if they were around first
Posted 9th May 2014 at 01:49 Profile

rallyeash Seasoned Pro Location: Devizes Registered: 11 Dec 2006 Posts: 4,424 Status: Offline	Post #4 I want one too! ________________________________________ 230 hp 2.1 16v XU 205 rallye on jenveys Project thread here 309 3dr K20 Type R
Posted 9th May 2014 at 15:34 Profile

eddy_gti6 Seasoned Pro Location: Durham Registered: 20 Oct 2008 Posts: 8,716 Status: Offline	Post #5 Would be good I suppose. I would have one ________________________________________ Clicky: [url =http://www.306gti6.com]click here[/url] remove the space between [url & =
Posted 9th May 2014 at 17:10 Profile

Puggitt Regular Location: New Zealand Registered: 07 May 2012 Posts: 293 Status: Offline	Post #6 They shouldn't be that hard to make if someone knows people who do vacuum/pressure thermo forming of plastic. Just form around an original, but I haven't had mine off in a while so I can't exactly remember the shapes
Posted 9th May 2014 at 17:43 Profile

aaron6 Seasoned Pro Location: On the sofa in maidstone Registered: 16 May 2006 Posts: 5,840 Status: Offline	Post #7 I could be up for one of those. ________________________________________ See the sheer power and might of the lesser known burrowing owl.
Posted 10th May 2014 at 15:11 Profile

The Peugeot GTi-6 & Rallye Owners Club - ©2026 all rights reserved.

Please Note: The views and opinions found herein are those of individuals, and not of The Peugeot 306 GTi-6 & Rallye Owners Club or any individuals involved.
No responsibility is taken or assumed for any comments or statements made on, or in relation to, this website. Please see our updated privacy policy. (NEW HOST)